The main equipment of the sandblasting cleaning room includes: cleaning room body, sandblasting system, abrasive circulation system, ventilation circulation system, air supply system, soft door lifting system, electric control system, etc. The paint spray drying system is mainly composed of a chamber body, an air supply heating system, an air filtration system, a paint mist filtration system, a lighting system, and an electrical control system.The equipment is a honeycomb wind circulation sandblasting (pill) system, which is suitable for shot blasting and derusting cleaning, and is a workplace for all-weather derusting and cleaning operations. The purpose of sandblasting and derusting is to remove the rust, welding slag, scale and surface attachments on the surface of the welded product, so that the surface of the product can reach a certain cleanliness index, so as to enhance the adhesion of the paint film, thereby fundamentally improving the resistance of the product. Corrosion ability and surface quality, preparing a clean and rust-free surface for painting operations. At the same time, after sand blasting, the welding stress distribution of the product has been significantly improved, and the fatigue resistance has been improved. This equipment can adjust the surface state of shot peening to achieve the effect of rust removal and low roughness value.  The environment-friendly honeycomb wind circulation sandblasting room is adopted, and the shot recovery, shot cleaning and dust removal are fully automatic.Its core technology is the honeycomb sand-absorbing floor produced by the introduction of American CLEMCO technology. Abrasives are recovered through pneumatic wind circulation, without augers, scrapers, bucket elevators, belt conveyors, no mechanical moving parts, less wear and tear, and fewer failures. Low maintenance workload, no need for deep pitsThe sandblasting of workpiece coating and workpiece bonding can remove all dirt such as rust on the surface of the workpiece, and establish a very important basic pattern (the so-called rough surface) on the surface of the workpiece, and can be passed through Replace the abrasives of different particle sizes, such as the abrasives of flying abrasives to achieve different degrees of roughness, which greatly improves the bonding force between the workpiece and the coating and plating. Or make the bonding parts stronger and better in quality.Cleaning and polishing of rough surface of castings and workpieces after heat treatment Sand blasting can clean all dirt on the surface of castings and forgings and workpieces after heat treatment (such as oxide skin, oil stains and other residues), and polish the surface of the workpiece to improve the smoothness of the workpiece. It can make the workpiece reveal the uniform and consistent metal color, making the appearance of the workpiece more beautiful and attractive.Burr cleaning and surface beautification of machined parts Sandblasting can clean small burrs on the surface of the workpiece and make the surface of the workpiece smoother, eliminating the hazards of burrs and improving the grade of the workpiece. Sand blasting can make small rounded corners at the junction of the workpiece surface, making the workpiece more beautiful and precise.The equipment is independently developed and designed by our company in combination with international advanced technology. It mainly has the following four advantages: 1. Adopt advanced pill-absorbing floor technology, no deep pit, can save a lot of infrastructure costs, easy to operate, less maintenance; high visibility, easy to observe the processing of workpieces; good working environment. 2. Equipped with a unique abrasive separator, it can remove broken pellets <0.1mm in the recycled pellets, so that the blasting process can maintain a stable cleaning efficiency. 3. Equipped with advanced aerodynamic + filter element two-stage dust removal filter element dust removal unit, small size, long life, easy maintenance, dust removal efficiency can reach 99.9%, and meet the environmental protection emission standards stipulated by the state. 4. Color steel sound-absorbing shot-peening chamber has high corrosion resistance, good sound-absorbing effect and beautiful appearance.The automatic environmental protection sandblasting room is mainly used for large workpieces or processing very expensive workpieces with automatic sandblasting equipment. The nozzle manipulator installed in the sandblasting room can automatically sandblast the surface of the parts, and the areas that are difficult to reach by automatic sandblasting can be completed by manual sandblasting. This maintains flexibility while reducing the number of blasting operators required.The main features of the sandblasting room: Longfa independent research and development design Adopting advanced pill-absorbing floor technology, no deep pits, which can save a lot of infrastructure costs; easy to operate, less maintenance; high visibility, easy to observe the processing of workpieces; good working environment. Equipped with a unique abrasive separator, which can remove broken pellets <0.1mm in the recovered pellets, so that the blasting process can maintain a stable cleaning efficiency. Equipped with advanced cyclone + filter two-stage dust removal filter element dust removal unit, small size, long life, easy maintenance, dust removal efficiency can reach 99.9%, meet the national environmental protection emission standards. Color-steel sound-absorbing shot blasting chamber, with high corrosion resistance, good sound-absorbing effect and beautiful appearance.● Chamber dust collector ● Sorting dust collector ● Sand (bucket) hopper ● Bucket elevator ● Primary separator ● Sand blasting machine ● Conveying mechanism ● Dust suction port ● honeycomb floor hopper ● Large fan ● Muffler ● Air inlet ● Ground rail trolley ● Secondary separation